VoIP with Frame Relay Cloud Part 2/3

**** BRANCH1 CONFIG ****
**********************************
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
no cdp enable
!
interface FastEthernet0/1.10
description **** VLAN 10 DATA ****
encapsulation dot1Q 10
ip address 192.168.10.1 255.255.255.0
!
interface FastEthernet0/1.20
description **** VLAN 20 VOICE ****
encapsulation dot1Q 20
ip address 192.168.20.1 255.255.255.0
!
interface FastEthernet0/1.30
description **** VLAN 30 MANAGEMENT ****
encapsulation dot1Q 30
ip address 192.168.30.1 255.255.255.0
!
interface FastEthernet0/1.40
encapsulation dot1Q 40 native
!
ip route 192.168.110.0 255.255.255.0 10.1.1.2 name BRANCH2_DATA
ip route 192.168.120.0 255.255.255.0 10.1.1.2 name BRANCH2_VOICE
ip route 192.168.210.0 255.255.255.0 10.1.1.3 name BRANCH3_DATA
ip route 192.168.220.0 255.255.255.0 10.1.1.3 name BRANCH3_VOICE
**** SWCORE1 CONFIG ****
**********************************
!
vlan database
vlan 10 name DATA
vlan 20 name VOICE
vlan 30 name MANAGEMENT
vlan 40 name NATIVE
apply
!
!
interface FastEthernet1/0
description **** CONNECTED to BRANCH1 ****
switchport mode trunk
no cdp enable
!
interface FastEthernet1/1
switchport access vlan 10
switchport voice vlan 20
spanning-tree portfast
!
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
interface Vlan30
description **** MANAGEMENT INTERFACE ****
ip address 192.168.30.2 255.255.255.0
!
ip default-gateway 192.168.30.1
!
!
line con 0
exec-timeout 0 0
logging synchronous
!
!
!
**** BRANCH2 CONFIG ****
**********************************
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
no cdp enable
no shutdown
!
interface FastEthernet0/1.10
description **** VLAN 10 DATA ****
encapsulation dot1Q 10
ip address 192.168.110.1 255.255.255.0
!
interface FastEthernet0/1.20
description **** VLAN 20 VOICE ****
encapsulation dot1Q 20
ip address 192.168.120.1 255.255.255.0
!
interface FastEthernet0/1.30
description **** VLAN 30 MANAGEMENT ****
encapsulation dot1Q 30
ip address 192.168.130.1 255.255.255.0
!
interface FastEthernet0/1.40
encapsulation dot1Q 40 native
!
ip route 0.0.0.0 0.0.0.0 10.1.1.1 name DEFAULT_ROUTE

**** SWCORE2 CONFIG ****
**********************************
!
vlan database
vlan 10 name DATA
vlan 20 name VOICE
vlan 30 name MANAGEMENT
vlan 40 name NATIVE
apply
!
!
interface FastEthernet1/0
description **** CONNECTED to BRANCH2 ****
switchport mode trunk
no cdp enable
!
interface FastEthernet1/1
switchport access vlan 10
switchport voice vlan 20
spanning-tree portfast
!
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
interface Vlan30
description **** MANAGEMENT INTERFACE ****
ip address 192.168.130.2 255.255.255.0
!
ip default-gateway 192.168.130.1
!
!
line con 0
exec-timeout 0 0
logging synchronous
!
!
!
**** BRANCH3 CONFIG ****
**********************************
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
no cdp enable
no shutdown
!
interface FastEthernet0/1.10
description **** VLAN 10 DATA ****
encapsulation dot1Q 10
ip address 192.168.210.1 255.255.255.0
!
interface FastEthernet0/1.20
description **** VLAN 20 VOICE ****
encapsulation dot1Q 20
ip address 192.168.220.1 255.255.255.0
!
interface FastEthernet0/1.30
description **** VLAN 30 MANAGEMENT ****
encapsulation dot1Q 30
ip address 192.168.230.1 255.255.255.0
!
interface FastEthernet0/1.40
encapsulation dot1Q 40 native
!
ip route 0.0.0.0 0.0.0.0 10.1.1.1 name DEFAULT_ROUTE

**** SWCORE3 CONFIG ****
**********************************
!
vlan database
vlan 10 name DATA
vlan 20 name VOICE
vlan 30 name MANAGEMENT
vlan 40 name NATIVE
apply
!
!
interface FastEthernet1/0
description **** CONNECTED to BRANCH3 ****
switchport mode trunk
no cdp enable
!
interface FastEthernet1/1
switchport access vlan 10
switchport voice vlan 20
spanning-tree portfast
!
!
interface Vlan1
no ip address
no ip route-cache
shutdown
!
interface Vlan30
description **** MANAGEMENT INTERFACE ****
ip address 192.168.230.2 255.255.255.0
!
ip default-gateway 192.168.230.1
!
!
line con 0
exec-timeout 0 0
logging synchronous
!
!
!
BRANCH1#ping ip 192.168.110.1 source fa0/1.10

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.110.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 56/82/120 ms
BRANCH1#ping ip 192.168.120.1 source fa0/1.10

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.120.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/91/152 ms
BRANCH1#ping ip 192.168.210.1 source fa0/1.10

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.210.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/84/144 ms
BRANCH1#ping ip 192.168.220.1 source fa0/1.10

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.220.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 48/76/112 ms
BRANCH1#ping ip 192.168.110.1 source fa0/1.20

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.110.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.20.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/82/136 ms
BRANCH1#ping ip 192.168.120.1 source fa0/1.20

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.120.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.20.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 64/80/104 ms
BRANCH1#ping ip 192.168.210.1 source fa0/1.20

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.210.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.20.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 44/73/116 ms
BRANCH1#ping ip 192.168.220.1 source fa0/1.20

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.220.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.20.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 40/70/120 ms
BRANCH1#

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s